STEMMED TWIST TYPE is suitable for cleaning on the inside of arbor holes. Typical application includes ranging from finish NF metals, steels cast irons etc. Shown below is a list of standard models and numbers.
| Stemmed Twist type | |
| Deburring, Cleaning the inside of arbor holes. | |
|
|
STEMMED TWIST TYPE is suitable for cleaning on the inside of arbor holes. Typical application includes ranging from finish NF metals, steels cast irons etc. Shown below is a list of standard models and numbers. |
| MODEL NOS. |
DIAMETER Dmm |
WIDTH Amm |
GRITTY | MAX. SAFE FREE SPEED (RPM) |
|||
| GN-C#80- 120-40%-S |
GN-C#120- 80-40%-S |
GN-C#240- 70-35%-S |
OUT OF STANDARD |
||||
| BC10 | 10 | 50 | 70101 | 70102 | 70103 | 70104 | 5000 |
| BC16 | 16 | 50 | 70201 | 70202 | 70203 | 70204 | 5000 |
| BC24 | 24 | 50 | 70301 | 70302 | 70303 | 70304 | 4000 |
| BC32 | 32 | 50 | 70401 | 70402 | 70403 | 70404 | 4000 |
| BC40 | 40 | 60 | 70501 | 70502 | 70503 | 70504 | 4000 |
| BC48 | 48 | 60 | 70601 | 70602 | 70603 | 70604 | 4000 |
| BC56 | 56 | 60 | 70701 | 70702 | 70703 | 70704 | 4000 |