Available any types and sizes upon request. Your detailed inquiries are welcome.
| Wheel type | |
| Grinding, Debarring etc. ranging from flat surface to round surfaces. | |
| WHEEL TYPE can be used on various grinding machines and tools. Shown below is a list of standard models and numbers. |
|
|
Available any types and sizes upon request. Your detailed inquiries are welcome. |
|
| MODEL NOS. | DIAMETER ØDmm |
TRIM Tmm | WIDTH Amm | ARBOR HOLE Ødmm |
MAX. SAFE FREE SPEED (RPM) |
| M3 | 75 | 15 | 10 | 13 | 5500 |
| M4 | 100 | 16 | 10 | 13 | 4000 |
| M5 | 125 | 20 | 15 | 13 | 3500 |
| M6 | 150 150 150 150 |
25 25 25 25 |
10 15 20 25 |
13 13 13 13 |
3000 3000 3000 3000 |
| M7 | 175 175 175 175 |
30 30 30 30 |
10 15 20 25 |
13 13 13 13 |
2500 2500 2500 2500 |
| M8 | 200 200 200 200 |
33 33 33 33 |
10 15 20 25 |
25.4 25.4 25.4 25.4 |
2000 2000 2000 2000 |
| M10 | 250 250 250 250 |
45 45 45 45 |
10 15 20 25 |
25.4 25.4 25.4 25.4 |
1500 1500 1500 1500 |
| M12 | 305 | 48 | 25 | 25.4 | 1200 |
|
Grit Size
|
Filament O.D.
|
|
#120 #170 #240 #320 #400
#600 #800 #1000 |
0.25mm - 1.00mm
|
@Most suitable grinding condition can be found out from wide variety of choice in brush type, filament diameter, grit size & percentage of grain etc. according to whole range of applications.
@Max. safe free speed is indicated only as rough standard and depends on actual operating condition.