STEMMED WHEEL TYPE is ideally suitable for brush in hard to reach areas. Application includes deburring, descaling, rust removal etc. Shown below is a list of standard models and numbers.
| Stemmed Wheel type | |
| Grinding and Polishing for manual working. | |
|
|
STEMMED WHEEL TYPE is ideally suitable for brush in hard to reach areas. Application includes deburring, descaling, rust removal etc. Shown below is a list of standard models and numbers. |
|
|
ØDmm |
|
|
FREE SPEED (RPM) |
| T30 | 30 30 30 |
8 8 8 |
10 20 30 |
8000 8000 8000 |
| T40 | 40 40 40 |
12 12 12 |
10 20 30 |
7000 7000 7000 |
| T50 | 50 50 50 |
16 16 16 |
10 20 30 |
6000 6000 6000 |
| T60 | 60 | 18 | 20 | 6000 |
| T70 | 70 70 70 |
21 21 21 |
10 20 30 |
5000 5000 5000 |
|
Grit Size
|
Filament O.D.
|
|
#120 #170 #240 #320 #400
#600 #800 #1000 |
0.25mm - 1.00mm
|
@Most suitable grinding condition can be found out from wide variety of choice in brush type, filament diameter, grit size & percentage of grain etc. according to whole range of applications.
@Max. safe free speed is indicated only as rough standard and depends on actual operating condition.