| Stemmed Twist type | |
| Deburring, Cleaning the inside of arbor holes. | |
|
|
STEMMED TWIST TYPE is suitable for cleaning on the
inside of arbor holes. Typical application includes ranging from finish
NF metals, steels cast irons etc. Shown below is a list of standard models
and numbers.
|
| MODEL NOS. | DIAMETER Dmm | WIDTH Amm | MAX. SAFE FREE SPEED (RPM) |
| BC10 | 10 | 50 | 5000 |
| BC16 | 16 | 50 | 5000 |
| BC24 | 24 | 50 | 4000 |
| BC32 | 32 | 50 | 4000 |
| BC40 | 40 | 60 | 4000 |
| BC48 | 48 | 60 | 4000 |
| BC56 | 56 | 60 | 4000 |
|
Grit Size
|
Filament O.D.
|
|
#120 #170 #240 #320 #400
#600 #800 #1000 |
0.25mm - 1.00mm
|
@Most suitable grinding condition can be found out from wide variety of choice in brush type, filament diameter, grit size & percentage of grain etc. according to whole range of applications.
@Max. safe free speed is indicated only as rough standard and depends on actual operating condition.