YAMATO SEITOSHO CO., LTD.

CHERRY BRAND
CUT-OFF WHEELS

YAMATO SEOTOSHO CO., LTD. has been manufacturing ultra thin RESINOID CUT-OFF WHEELS (YAMATO-CUT) and RUBBER CUT-OFF WHEELS (CHERRY-CUT). These two types of wheels have high durability and elasticity

wheels provide excellent permit cutting-off of provide

There is strong and sharpness with resilience. Cutting off any hard material at short time, and that cutting face is very fine finish. Choose RESINOID GRIND and RUBBER GRIND to work, enable exactly cut off any material to wet and dry working.

YAMATO-CUT CHERRY-CUT
High performance thickness accuracy, Sharpness and long life grind. Enable work both wet and dry condition for SPECIAL RESINOID, but wet condition is better working than dry condition. Having many grind type of material(A-type, C-type), grain size and grade etc.‚š

CHERRY-CUT is grind with very resilence, original make good quality natural rubber and composite rubber. Mainly, wet condition is good working, and enable fine finish cutting face. Good performance for TUNGSTEN, GROOVING MOLYBDENUM RESISTANCE and working a lot of numbers nonferrous metal etc.
TYPICAL APPLICATIONS YAMATO-CUT and CHERRY-CUT 
(1)FOR MEDICAL - SYRINGE NEEDLE, NICKEL PIPE
(2)FOR STRUCTURE ANALYSIS,
       CUTTING SAMPLE FOR SECTIONAL TEST
(3)FOR CUTTING ELECTRONICS PARTS
(4)FOR CLLET CHUCK GROOVE,
       GROOVING RESISTANCE MAGNETIC MATERIAL
(5)FOR CUTTING OPTICAL GLASS, CERAMICS,
       CARBON, TUNGSTEN
USING YAMATO-CUT and CHERRY-CUT

VERY THIN CUT-OFF WHEEL is main working minute cutting, and attention ...

(1)CUTTING MACHINE VIBRATION (TO BAD SEAT)
(2)IRREGULAR PRESSUR
(3)SUITABLE R.P.M
   (1800-2200m/min WET CONDITION)
(4)FLANGE SIZE
   (ABOUT HUNDRED TIMES OF GRIND THICKNESS)

VERY THIN CUT-OFF WHEEL work high performance cutting and keep performance, if you keep low grind vibration and suitable speed.

‚š

GRIND SIZE

STANDARD SIZE
OUTSIDE DIAMATER
THICKNESS
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.2
1.3
50
0 0 0 0 0 0 0 0 0 0 0 0
65
0 0 0 0 0 0 0 0 0 0 0 0
75
0 0 0 0 0 0 0 0 0 0 0 0
100
0 0 0 0 0 0 0 0 0 0 0 0
125
0 0 0 0 0 0 0 0 0 0 0 0
150
0 0 0 0 0 0 0 0 0 0 0 0
180
0 0 0 0 0 0 0 0 0 0 0 0
205
0 0 0 0 0 0 0 0 0 0 0 0
230
0 0 0 0 0 0 0 0 0 0 0 0
255
0 0 0 0 0 0 0 0 0 0 0 0

Standard SIZE
Manufacture SIZE
Special SIZE

 

SELECTION

Please tell me deteailed condition, reference next table. We are put cutting test into effect at any time.

0
CONDITION
0
MATERIAL
Grind R.P.M
??? rpm
Parts Name
???
Forwarding Speed
Grind·Work ??? m/min
Material
???
Cutting Formula
WET or DRY
Hardness
HRC ???
Motor Power
??? HP
Size
???
Cutting Time
??? sec
Size of 1 Cut
???
A Mater Pressur
???
0 0
Number of Grind
??? piece
0 0
Grinding Lubricant
???
(Grind Size)
??? ×??? × ???

BACK

HOME